Feurio CD-Writer Data Base: Brainwave CRD-BP2N |
|---|
|
|---|
| Writer
Name: | Brainwave CRD-BP2N |
| Device-ID: |
GENERIC CRD-BP2 |
| Interface: |
SCSI |
| Writing
Speed CD-R: | 1x, 2x, 4x, 8x, 12x |
| Writing
Speed CD-RW: | 2x, 4x |
| Buffer
Memory: | 1800 / 3800 1) |
| Write
Index Marks: | Yes |
| Write
UPC-Code: | Yes |
| Write
ISRC-Code: | Yes |
| Read
Recorder Buffer Occupancy: | Yes |
| Burn
80-Minutes CD-Rs: | Yes |
| Burn
90/99-Minutes CD-Rs: | Yes and No: The CD-Rs can maximally
be written up to 93:59 . (Only with firmware version higher than:
2.27; if you have an older firmware, you have to update it first) |
| Overburning: |
Yes (Only with firmware version higher than:
2.27; if you have an older firmware, you have to update it first) |
| CD-R
Capacity Test: | Yes (Only with firmware
version higher than: 2.27; if you have an older firmware, you have to update
it first) |
| Read
Manufacturer Code: | Yes |
| Write
CD-Text: | Yes |
| Burn
Data-CDs with Feurio!: | Yes |
| Leave
CD Open (Session-at-Once): | Yes |
| Burn-Proof: |
Yes |
| Burn
Audio CD-Rs: | Yes |
| Track
1, Index 1 > 00:03:00: | Yes |
| Read
ATIP Information: | Yes |
| State
Of Implantation in Feurio!: | The writer is fully supported by Feurio!
We have a sample of this writer available, therefore we were able to test and
optimize the Feurio! support for this writer in in detail. In particular we are
able to test the writer with future updates of Feurio! and can react very well
to error messages. The writer is recommended for use with Feurio! |
| Web
Links: | |
Footnotes:
| 1) | On some CD-Writers the
actually usable buffer memory differs from the size of present buffer memory.
In this case first the actually usable buffer size and then the size of present
buffer memory (taking e.g. from the technical specifications) is shown.
This is caused by the recorder requiring a part of memory for internal purposes
or the number of maximum storable sectors is limited.
PRESUMPTION: Another possible explanation would be: Due to the error correction
information and other coding a sector occupies much more space (i.e. not 2048/2352
bytes per sector but about 4000 bytes) on the CD than in memory. If the information
would be converterd to CD format BEFORE storing them in the buffer, they would
correspondingly require more space in the recorder´s buffer memory. This
reduces the actually usable buffer size.
Example: Buffer memory = 2048 kb.
Size coded sector: 4194 bytes -> 2048*1024/4194 = 500 sectors can be stored
in the buffer. But in audio format these 500 sectors only represents 1148 kb
(500*2352/1024), so the buffer really stores only 1148 kb audio information,
although its physical size is 2048 kb.
|
|
|
And keep in mind that this information
may change any time with other firmware versions or production deviations!
If you have found an error or have additions or the parameters of a new CD-Writer,
please send an e-mail to: support@feurio.com.
Or simpley use the Feedback Form!.
